24
DLC170 Function Modules Installation and Operations Manual
DLC170 Function Modules
The the DLC170DA decodes the analog outputs from 20-bit or 24-bit audio embedded in the SDI at a sampling
rate of 48 kHz. An eight-position miniature rotary switch SW4 allows you to set the A/D 0 dBFS level from
+10 dBm to +24 dBm into 600 Ohms in 2 dB steps. The 0 dBFS level switch setting is available to the optional
EMS, which can override the switch setting.
DLC170DA Overview
provides a view of the major components of the DLC170DA.
Figure 15.
DLC170DA Module Major Components
describes the components called out in
Table 7.
DLC170DA Elements
Item
DLC170DA Element
for details, see...
1
Rear panel quad three-pin terminal block for audio output
(an audio connector is provided that enables screw-on cable
connections).
Cabling the Audio Connections (page
2
Rear panel BNC connector for video output.
Cabling the Electrical Video Connections
1
2
11
3
4
6
8
9
10
5
7