15
Display Track Fresnel 20 SW
Product code: A0320140 / A0320141
5.
Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as an architectural light spot. It is suitable for indoor installation
in shops, exhibition halls, showrooms and similar venues. This device is not suitable for.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Manual Control
The Display Track Fresnel 20 SW can be operated only manually. The device is equipped with a color
temperature switch and a manual dimmer control.
●
Set the color temperature switch (14) to CW or WW position to turn the device on.
●
CW (cold white) position – the light will turn on with a predefined color temperature of 6000 K
●
WW (warm white) position – the light will turn on with a predefined color temperature of 3000 K
●
Turn the manual dimmer control (15) to adjust the light intensity. The adjustment range is 5–100 %.
●
Set the color temperature switch (14) to OFF position to turn the device off.
Beam Angle Adjustment
The beam angle of the Display Track Fresnel 20 SW can be adjusted manually in the range 13°–57°. To
adjust the beam angle, follow the steps below:
01)
Turn the zoom control (10) counterclockwise to loosen it.
02)
Slide the zoom control (10) forwards or backwards to achieve the desired beam angle (see Fig. 22).
03)
After adjusting the beam angle, turn the zoom control (10) clockwise to tighten it. Do not
overtighten it.
Fig. 22
Summary of Contents for A0320140
Page 20: ...2020 Artecta...