www. artlighting.cz
9
C.
Storing of the selected colors
-
When the DMX address 1 is set then press and hold the down button for approx. 2 seconds
until the display shows the item
C.01
. Then you can normally scroll through the items (by
holding or by individual pressing of the buttons).
-
The previous article describes how to display the required item. Now we will demonstrate
the practical procedure on how to change the colors (how to enter other values into the
memory). To be able to do this it is necessary to connect the DMX signal to the equipment,
otherwise you can not proceed. The connected DMX signal is indicated by the green LED
indicator.
-
Scroll on the display the number of the color (memory number) that we want to modify –
display
C.01
-
C.30
-
By pressing and holding both up and down buttons simultaneously for approx. 3 seconds the
“
C
” of the particular memory number starts to flash, in which we want to store or change the
value.
-
Use the control console to set the required color.
-
By pressing the up button the set color will be stored in the memory.
-
By pressing the down button the storing process will be finished.
D.
Recalling memory without DMX signal.
-
When the DMX address 1 is set then press and hold the down button for approx. 2 seconds
until the display shows the item
C.01
. Then you can normally scroll through the items (by
holding or by individual pressing of the buttons).
E.
Distribution of DMX values in the channel No. 7 – DMX table
DMX table of the channel No. 7 (virtual colour changer)
MEMORY
DMX
MEMORY
DMX
MEMORY
DMX
1
16 - 23
11
96 - 103
21
176 - 183
2
24 - 31
12
104 - 111
22
184 - 191
3
32 - 39
13
112 - 119
23
192- 199
4
40 - 47
14
120 - 127
24
200 - 207
5
48 - 55
15
128 - 135
25
208 - 215
6
56 - 63
16
136 - 143
26
216 - 223
7
64 -71
17
144 - 151
27
224 - 231
8
72 - 79
18
152 - 159
28
232 - 239
9
80 - 87
19
160 - 167
29
240 - 247
10
88 - 95
20
168 - 175
30
248 - 255
