Art. Lebedev Maximus Keyboard, User Manual

Page: 8 / 10

There are greasy spots under the key caps
If you took out the keys, you could stain them with silicone grease. You can
try to clean it off by rubbing the surface with weak alcohol. Be very careful
doing this—do not let the alcohol on the inner electronic side of the key. Be­
fore putting the key in let the liquid dry a few minutes.
There are significant image distortions on the key display
The key or the keyboard may be defective.
Try placing an efficient key instead of that one. If the distortions remain,
it is likely that the keyboard is defective.
If the distortions remain when you install that key into other places, it is
likely that that key is defective. It needs to be replaced by another one.
I can’t remove the keys
You need to apply some effort to remove the keys using the special tool en­
closed with the keyboard. Before doing this study the instruction at
optimus.artlebedev.com
I have bent a pin contact when installing a key
Before installing keys study the instruction at optimus.artlebedev.com. It also
contains recommendations on your problem.
Brightness auto adjustment fails
This mode is program activated. If it is activated but fails, it is likely that
there is dust built­up on the light sensor in the right upper corner near
the logo. Clean it.
The keyboard doesn’t work after I changed firmware
You can always go back to the first version. Read how to do this at
optimus.artlebedev.com.
The keyboard fell and no longer works
The keyboard can withstand light shocks, but the key displays are likely
to get damaged if it falls.