30
alpha tattoo pen
english
How to change the travel from 3 mm to 3.8 mm.
NOTE: The process of the changing the eccentric set to the two possible
measurements is the same for both.
To help differentiate the 3.8 mm eccentric set from the 3 mm eccentric
set, the 3.8 mm eccentric has a dot on one of its sides.
To change the set, it is enough to turn the binding that joints the machi-
ne in two separate parts (A and B). Keep a firm grip on part A and, with
your other hand, unscrew part B from right to left, until the machine
separates into two halves (figure 7).
Once the two parts are separate, you will be able to see the eccentric set
as shown in figure 8.
Figure 6.2.
Figure 6.3.
Figure 7.
PART A
PART B
Summary of Contents for Alpha Pen
