Page 8 · 286
TECMount
User’s Manual
Mounting Plates
The
286
TECMount
is available in a standard bread board configuration with M3
holes on 10mm centers. Custom versions of the cold plate are available, contact
the factory for details. Your
286
may be configured with a custom mounting
plate, and if so, this manual should be accompanied by drawing for your plate.
Connector Pin-Outs
The
286
employs two connectors: a 17W2 for the temperature controller
interface, and a 4-pin Phoenix quick disconnect for external/auxiliary sensor
inputs.
286 Connectors
