User Guide -
MeshAP 3100 5GHz/2.4GHz Full Duplex Mesh Network Access Point
DOC-6200-0152
- 73 -
Note:
Mesh Manager IP address is different from the Fail-safe/Local IP address. Fail-
safe/Local IP is for Administrator to access the unit directly for Fail-Safe operation. Fail-
Safe/Local IP address only could be access with directly connection. There is no remote
access for this address due to security concern. The Mesh Manager IP address is the IP
address assign to the Mesh Network. Mesh Manager IP is necessary for every Mesh
network. The default Mesh Manager IP address is
192.168.1.254
.
To Set Fail-safe/Local IP for Mesh Station
Step 1:
Login
to the Station Management Interface
Step 2: Go to
Setup
under
MESH
. Click on the “
Advanced
” tab
Step 3: Select
either
192.168.1.8
or
10.10.10.8
as the Fail-safe/Local IP address
Step 4: Click
“Save Settings and Apply”
Note:
There are ten(10) Fail-safe/Local IP addresses could be chosen for Mesh AP Station.
192.168.1.8, 192.168.1.9, 192.168.1.10, 192.168.1.11, 192.168.1.12, 10.10.10.8
,
10.10.10.9
,
10.10.10.10
,
10.10.10.11
,
10.10.10.12
.
Clear ARP Table on Laptop or PC
Unable to logon using Fail-safe/Local IP to configure multiple MeshAP units
A number of MeshAPs are being accessed with a laptop or PC via Ethernet port to perform
configuration. The Ethernet connection to the first device works fine, but connecting to
subsequent MeshAPs with same IP address requires some technique to work correctly.
