User Guide -
MeshAP 3100 5GHz/2.4GHz Full Duplex Mesh Network Access Point
DOC-6200-0152
- 71 -
Chapter 14
Fail-safe/Local IP Address
Fail-safe/Local IP Address:
192.168.1.8
Fail-safe/Local IP address is designed to be always reachable by the Administrator with a
direct Local
Ethernet
or
Wireless
connection. This address provides Administrator a way
access MeshAP even a unit has been configured to a unknown setting.
Retrieve ISP Assigned Mesh Manager IP Address under DHCP
Mode
Fail-safe/Local IP address also could be use to retrieve IP Address for the Mesh Manager
when Mesh Manager unit is set to DHCP Mode. Under DHCP Mode Mesh Manager unit
will acquired an IP Address directly from ISP. This may cost administrator unable to access
the Mesh Manager due to unknown IP Address being assign to the Mesh Manager unit from
the ISP network. Fail-safe/Local IP address could to use to access the Mesh Manager unit
Local Link 1
Direct Wireless
(802.11b/g)
Connection to Station or Manager’s
2.4GHz AP (Access Point)
Local Link 2
Direct Wire (Ethernet)
Connection to Station or Manager’s
Ethernet port
or
Local Link
