b.
You should feel the head gate rollers moving when you open the head gate. The
rollers should be tight enough to be moved by hand, but not over-tight to cause the
rollers to bind.
✓
Clean bottom head gate door track to prevent dirt-build-up.
WHEN NECESSARY
✓
If needed, clean and lubricate the Q-Catch track shaft.
a. To clean: Use brake cleaner to remove build-up and degrease the shaft. Open and
close (or squeeze and un-squeeze) to clean the entire shaft.
b. To lubricate: Spray WD-40 Dry Lube on a rag. Open or squeeze. Wipe shaft. Close
or un-squeeze. Wipe shaft. Open and close (or squeeze and un-squeeze) a few
times to work the lubricant in.
RECOMMENDED MAINTENANCE | 5