1. Q-CATCH DOOR
2. Q-CATCH TRACK SHAFT
3. LONG HAMMER
4. SQUEEZE ARM PLATE
5. CONTROL TOWER DOM TUBE
6. HEAD GATE HAMMER
7. Q-CATCH CONTROL HANDLE
8. REAR CONTROL BAR STOPPER
9. Q-CATCH ROLLER
10. Q-CATCH ROLLER BOLT
3E Q-CATCH HEAD GATE ASSEMBLY
Your head gate will arrive fully assembled and ready for use. However, if you need to
dissemble your head gate for any reason, the following guide will help you to properly
reassemble it.
ASSEMBLING THE Q-CATCH HEAD GATE
Fit the mechanism parts as shown in the diagram below.
EMERGENCY HEAD GATE RELEASE
Arrowquip equipment is designed to ensure the safety of both animal and operator. With
proper maintenance and lubrication, the head gate will not jam under pressure.
However, in the rare event that an animal becomes stuck in the head gate, the following
guidelines will ensure you are able to release your animal quickly and safely.
REQUIRED TOOLS
- Screw Driver/Pry Bar
1
2
7
8
5
4
3
6
9
10
1
2 | 3E Q-CATCH HEAD GATE ASSEMBLY
