8
OPENING AND CLOSING BY USER
The Opening and Closing by user code identifies the user who disarms (opening) and
arms (closing) the system. This is accomplished by assigning an individual access code
to each user, (up to 8 users on the AV9000 and SC700 ). The primary access code is
always reported as user one. Seven additional secondary access codes may be selected
for the AV9000 and SC700.
Select secondary codes as shown in Entering or Changing Secondary Access Code
Section.
CHIME MODE
Your installer may have designated certain burglary zones to briefly activate the mini-
sounder contained in each keypad. These zones typically annunciate that a door has
been opened or closed while the panel was disarmed. To select for chime operation,
enter the following key sequence:
Figure 10
✚
▲
*
✚
✚
▲
#
●
3
●
1
2
■
4
ACCESS CODE
■
6
If chime operation is not desired, simply re-enter the key sequence.
FAULT CONDITION
A Fault Condition could, if unheeded, potentially render your system inactive. If such a
fault should occur it will be indicated by a flashing green READY light, a TROUBLE
message on the LCD display, and an audible warning tone at the keypad.
To identify the nature of the Fault Condition, enter the following sequence. This will also
silence the audible warning:
Figure 13
◆
9
✚
▲
*
✚
✚
▲
#
●
3
●
1
2
■
4
ACCESS CODE
Fault conditions will be displayed on the LCD display.
The LCD display will now indicate the nature of the problem and it will scroll through the
problems if there is more than one. Discuss with your installer what action to take if a
problem should occur. If a trouble condition occurs on a fire zone,(or Day/Night Trouble
