9/30
5.2 Starting the Board for the First time
For starting the board for the first time, follow these simple steps:
Step 1.
Connect the HDMI cable to the SD 600eval HDMI connector (marked J13) and to the HDMI Monitor.
Step 2.
Connect the keyboard to the board’s USB connector marked J11 and the mouse to the USB connector marked J12.
(Connection can be done in any order)
Step 3.
Ensure that the boot switches are set to ‘0000’, all in OFF position.
Step 4.
Connect the power supply to power connector J2
.
Once user plugs the power supply into a power outlet the board will start the booting process Android/Linux boot up appears on
Display.
6.
Component Details
6.1 Processor
Qualcomm 600 APQ8064 PoP (839BNSP)
The Qualcomm Snapdragon 600 APQ8064 (PoP) is a 4 Krait uP cores (up to 1.7 GHz), plus 1 QDSP6 core (to 500 MHz)
Adreno 320 3D Graphics at 400 MHz / 325 MHz (turbo/ nominal) with support for OpenGL ES 1.x, 2.0, 3.0; Direct3D Dx9.x; C2D
for 2D composition; OpenCL 1.1 embedded profile (for GPGPU)
6.2 PMIC
SD 600eval uses PMM8920 for its power management requirement. PMM8920 integrates two power management die into a
single package. PMM8920 has 9 switching regulators, 22 LDO’s & 9 LVS (Low Voltage Switches) driver ports. PMM8920 provides
power to different rails of processor as well peripherals on board. PMM8920 maintains the power sequence for APQ8064
6.3 Memory (DRAM)
The SD 600eval uses Package-on-Package (POP) high-speed 2 GB LPDDR2 memory. The LPDDR2 is a 32bit width bus memory
device mounted on APQ8064 with POP/Bare die. The maximum LPDDR2 clock is 533 MHz.
6.4 Storage
6.4.1 eMMC
SD 600eval has onboard 16GB eMMC nand flash and is the default boot location. eMMC is 8-bit implementation, interfaced
with SDC1 port of APQ8064 supporting MMC 4.5 specifications.
6.4.2 Micro SDHC
The 96Boards CE specification calls for a micro SDHC socket to be present on the board. The micro SDHC socket (J10) is placed
on the bottom left corner of the SD 600eval board and is routed directly to SDC3 port of APQ8064.The Micro SD slot is a push-
push type with a dedicated support for card detect signal. SDIO interface implemented for SD card has 4 data lines, one
command, clock and card detect signals.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
