10/30
6.4.3 Boot Configuration
For boot mode configuration on SD 600eval board, a 4 position SPST dip switch (SW5_SPST1) is located at the bottom side of the
SD 600eval board.
CONFIG switch in ON position indicates a Logic 1 level
Boot Selection table is shown below:
CONFIG_0
(Position-1)
CONFIG_1
(Position-2)
Function
1
1
EMERGENCY BOOT (SDC3 FOLLOWED BY USB HS)
0
1
SDC3 FOLLOWED BY SDC1 (eMMC)
1
0
SDC3 FOLLOWED BY SDC2 (Invalid)
0
0
SDC1 (eMMC) DEFAULT
Fast and secure boot selection
CONFIG_6
(Position-3)
Function
1
SECURITY BOOT
0
FAST BOOT
Forcefully entering SD 600eval board in Fast boot mode
FORCE_USB_BOOT
(Position-4)
Function
1
SDC3 FOLLOWED BY SDC1 (eMMC)
0
NO OPERATION
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from