The studs provide a surface for at-
taching the siding panels.
1
Following dimensions, measuring
from the ends of angles, place a
stud
between each corner and splice post
at the rear of building and 2
studs
between corner posts at the sides.
Position stud inside top angle and
fasten with a screw at the lower hole.
2
Rest bottom tab (large hole) out-
side floor frame. Do not fasten tab at
this time. Repeat procedure for the
remaining studs around the building.
●
●
●
●
●
9344 Siding Stud (6)
●
Parts Needed For
●
Studs
Step 8
W21
21
9344
LARGE HOLE
DO NOT FASTEN TAB
AT THIS TIME
FASTEN STUD AT
LOWER HOLE
23 5/16"
59 cm
22 1/16"
56 cm
FRONT
