The door jambs reinforce the door
opening and provide an attractive
trim. The splice post supports the
rear wall.
1
Position
splice post
at the center
of the rear wall and fasten using 4
bolts and nuts into rear wall angle
and 2 screws into rear floor frame.
Hint:
Measure or count holes to de-
termine if post is centered on rear.
2
Fasten the top of the
door jambs
to the door track with two screws. Do
the same for the bottom into frame.
Notched edge faces toward center of
building. Fasten middle hole on in-
side edge of door jamb with a bolt
inside building and a hex nut with an
acorn nut outside, as shown.
●
●
●
●
●
5287 Splice Post (1)
●
●
●
●
●
7311 Door Jamb (2)
●
Parts Needed For
●
Splice Post/Door Jamb
Step 7
W20
20
5287
1
STEP
STEP
2
NOTCHED EDGE
MUST FACE CENTER
OF BUILDING
FRONT
3/8" Bolt
Hex Nut
FRONT
Washer
7311
7311
Acorn Nut
