®
DVi25S Direct Vent Gas-Fired Fireplace Insert Room Heater
Upon completing the gas line connection, a small
amount of air will be in the lines. When first lighting the
pilot light, it will take a few minutes for the lines to purge
themselves of this air. Once the purging is complete,
the pilot and burner will light and operate as indicated in
the Instruction Manual.
Subsequent lightings of the appliance will not require
such purging.
When lit for the first time, the appliance will emit a slight
odor for an hour or two. This is due to paint and lubri-
cants used in the manufacturing process. Additionally,
for the first few minutes after each lighting, vapor may
condense and fog the glass and the flames may be blue.
After a few minutes, this moisture will disappear and
within 15-30 minutes the flames should become yellow.
CAUTION:
During the initial purging and
subsequent lightings, NEVER allow the gas
valve control knob to remain depressed in
the “pilot” position without pushing the red
ignitor button at least once every second.
9-98
17 29855A
CAUTION:
The Logs can get very hot. -
only handle them when they are cool.
SEASONAL SHUTDOWN
When the burning season comes to an end, the
entire system should be shut down to prevent gas
running to the appliance while it is not in use.
OPERATION PROCEDURE DURING REGU-
LAR USE
Simply turn the switch/thermostat to the ON position.
This will ignite the main burner.
SHUTDOWN DURING REGULAR USE
Simply turn the switch/thermostat to OFF. This will
disengage the burner and the flames will extinguish.
Keep the Control Compartment, Logs, and Burner
area surrounding the Logs clean by vacuuming
and/or brushing the area at least twice a year.
