Step 8
AZ21
●
Parts Needed For
●
Wall Panels
●
●
●
●
●
8995 Wall Panel (6)
Each wall panel has a crimped rib on
one side. The crimped rib should go
under the rib of the panel that follows
it.
1
Locate all of the
wall panels
and
set each one alongside the building.
2
Fasten the wall panels at the top
and bottom with screws.
3
Fasten the center of each panel to
the wall channel with screws. Fasten
overlapping ribs using a bolt and nut
with two screws.
4
When you have attached all wall
panels in the correct positions, the
building will look like this.
21
STEP
1
STEP
2
8995
STEP
3
Bolt and nut
does not go thru
wall channel
at overlap
Crimped Rib
Underneath
STEP
4
Use bolts and
nuts thru wall
angle overlap
at the top of
panel at rear.
8995
8995
8995
Detail Showing
Center of Panel Screwed
to Wall Channel
8995 8995
Panels rest on
frame as shown
