Step 8
A21 ctr
Parts Needed For
Wall Panels
9364 Wall Panel (4)
8995 Wall Panel (4)
The wall panels come in two widths.
Each wall panel has a crimped rib
on one side. The crimped rib should
go under the rib of the panel that
follows it.
1
Locate all of the wall panels and
set each one alongside the building.
2
Be sure that you have the correct
panels in each position. Do this by
overlapping the panels and determin-
ing if the holes line up with the holes
in the frame.
3
Fasten the wall panels at the top
and bottom with screws.
4
Fasten the center of each panel to
the wall channel with screws. Fasten
overlapping ribs as before.
5
When you have attached all wall
panels in the correct positions, the
building will look like this.
STEP
1
9364
STEP
2
9364
STEP
4
STEP
3
Crimped Rib
Underneath
STEP
5
Use bolts and
nuts thru wall
angle overlaps
at the top of
panel at sides
and rear.
8995
9364
9364
8995
Detail Showing
Center of Panel Screwed
to Wall Channel
8995 8995
Panels rest on
frame as shown
21
(112)
(17)
Bolt and nut
does not go thru
wall channel
at overlap
Summary of Contents for MRD108
Page 2: ......
