6
PANEL & CHANNEL ASSEMBLY TIPS
06BA
At the top of each page you will see one or more
Part
Cues
like the one to the left. These
Part Cues
are
designed to help you quickly identify the parts needed
for each step.
#####
5
Part No.
Quantity Needed
End View
Part Name
Part Name
Confi rm that all hardware and parts are
present before attempting to assemble
your building.
Part Numbers
Part Number
1. Each part has an identifying part number on it.
2. Part Numbers are referenced in each step.
3. Unpainted parts have a stamped in number and painted
parts have a number that is inked on.
Remove inked on numbers with soap and water after assembly.
PANEL
1.
Recommend a large table or sawhorses with plywood for working surface.
2.
Corners will need to hang off of work surface, so an elevated fl at surface is important.
3.
Arrows always point up, and always get covered.
4.
Start from middle and work your way out to push together panels.
5.
Panels can be pulled apart if not aligned properly. Once channels are applied, the wall assembly will be “fi nal”.
CHANNEL
6.
Work from one end and angle the channel. Line up a section and then tap the channel to work it into place.
Continue working your way down the channel.
7.
To watch the How-to-Assemble Video, go to:
http://www.shelterlogic.com/ezee
For missing or damaged parts contact
Customer Service. Do not return to store.
