18
●
Parts Needed For
●
Wall Panels
Step 8
●
●
●
●
●
6515 Wall Panel (2)
Each wall panel has a crimped rib on
one side. The crimped rib should go
under the rib of the panel that follows
it.
1
Locate all of the
wall panels
and
set each one alongside the building.
2
Be sure that you have the correct
panels in each position. Do this by
overlapping the panels and deter-
mining if the holes line up with the
holes in the frame.
Panels rest on
frame as shown
2
STEP
1
6515
STEP
Crimped Rib
Underneath
YU18
(30)
(3)
3
Fasten the wall panels
at the top
and bottom with screws.
4
Fasten the center of each panel to
the wall channel with screws.
Fasten overlapping ribs as before.
3
STEP
Bolt and nut
does not go thru
wall channel
at overlap
4
STEP
Detail Showing
Center of Panel
Screwed to Wall
Channel
