Step 2
YU12
12
●
Parts Needed For
●
Frame Assemblies
●
●
●
●
●
10567 Rear Wall Angle (2)
●
●
●
●
●
9917 Rear Wall Channel (2)
The main frame pieces reinforce the
walls. These pieces will later be in-
stalled in the center and at the top
edge of the rear wall. Proceed as
follows:
1
Overlap the
rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
one bolt in the center hole
(three
holes will align).
2
Overlap the
rear wall angle
pieces
as shown in the figure and fasten
them together with
one bolt in the
center hole.
3
Double check the length of each
and set these pieces aside for later
use.
9917
9917
STEP
1
Rear Wall Channel
118 1/8" 300,0 cm
10567
STEP
2
10567
Rear Wall Angle
118 1/8" 300,0 cm
Rear Wall Channel
118 1/8" 300,0 cm
Rear Wall Angle
118 1/8" 300,0 cm
STEP
3
(2)
