16
CHECK THAT ALL ASSEMBLED PARTS ARE
THE CORRECT LENGTH BEFORE CONTINUING
You will need for this page:
Step 2: Continued
Overlap two (2)
Side Wall Channels
so that three (3)
holes align as shown. Insert one (1)
Sand Bolt
and
Nut
through the center hole. Set aside for use in Step 13.
5
Overlap two (2)
Side Wall Angles
so that three (3)
holes align as shown. Insert one (1)
Sand Bolt
and
Nut
through the center hole. Set aside for use in Step 10.
4
6
Repeat steps 4 & 5 to build a second set of each
assembly.
10715
Side Channel
4
10706
Side Angle
4
Finished Length
94 1/8” (239,1 cm)
7 5/8” (19,4 cm)
Overlap Length
16W
(QTY: 4)
SB
10715
10715
10706
10706
BUILD TWO (2) OF EACH
7
Check that the fi nished length of the assemblies is
94 1/8” ( 239,1 cm).
Overlap parts so three
(3) holes align.
10706
Place bolt and nut through
center hole only.
Overlap parts so three
(3) holes align.
10715
Place bolt and nut through
center hole only.
