15
You will need for this page:
Step 5: Gables
15AR
Install Track Support.
Working with one
Gable
at a time,
attach the
Gables
to the top
Rear
Frame
with
Large Screws
. Do not
insert screws into the two (2) holes closest
to where the
Gables
join. These will be
used to attach the
Track Support
later.
1
To secure
Gables
together, position
the
Gable Brace
as shown below
and insert a single
Small
Bolt
and
Nut
through the second hole from the
bottom only.
2
3
Position
Track Supports
as
shown. Secure
Track Supports
to
Gable
using one
Small
Bolt
and
Nut
. Secure to
Rear Frame
using two (2)
Large Screws
.
Gable must fi t UNDER Side Wall Angle at corner.
(QTY: 2)
(QTY: 16)
Leave two holes open on each side of
the Gable peak to attach Track Support.
Attach Gable to holes closest
to the outside of the building.
SB
SB
LS
Attach Brace with Bolt thru
second hole from bottom only.
SB
Gable
Rear Wall
Outside
Inside
LS
LS
LS
Reused Parts:
• Left Gable (1)
• Right Gable (1)
• Gable Brace (1)
• Track Support (2)
