manualshive.com logo in svg

Arris Touchstone TM508, Installation Manual

Share
Download
Arris Touchstone TM508 Installation Manual Download Page 20

10

Touchstone Telephony Release 5 Standard 1.2 Mar 2007

Inspecting and Unpacking the 
Telephony Modem

Use this procedure to ensure the Telephony Modem package contains 
all the required components, and that the unit is not damaged.

Package Contents

The TM508 or TM512 package contains the following items:

1 Telephony Modem

2 Two bar-coded MAC address labels

3 Mounting brackets and screws

4 Power cable

5 End-User License Agreement (EULA)

6 four adhesive-backed rubber feet

Note:

If any items are missing, call your ARRIS sales representa-

tive for replacements. If the contents appear to be damaged, call the 
shipping company and file a claim.

Action

Follow these steps to inspect and unpack the Telephony Modem.

1

Before opening the box, visually inspect the package for visible 
damage.

Note:

If the package shows visible signs of damage, contact the 

shipping company for instructions. Do not open a damaged package 
before consulting the shipping company.

1

2

3

4

5

6

Summary of Contents for Touchstone TM508











































Reviews:

No comments

Brands by name

Popular brands

Load more brands