Home
Prev Next
Touchstone DTM602G Telephony Modem Setup Guide
14
3. Push the battery pack into the bay until it seats into place. The following di-
agram shows a Telephony Modem with a 4-cell battery pack installed. If you
are taking the battery out of the unit, use the battery pull strap to
dislodge the battery.
NOTE: The Telephony Modem will not begin operating until you apply AC
power.
4. Replace the door. To do so, place the hinge tabs of the battery door into the
receiver slots inside the Telephony Modem battery compartment on the op-
posite end of the battery opening slot. Slide the door toward the unit until
the latch snaps back into place.
NOTE: Please recycle or dispose of the battery responsibly and in accor-
dance with local ordinances.
