Copyright 2017 – ARRIS Enterprises Inc. All rights reserved.
4
5.
Manually Tune, to gain Signal lock
Select Quick Install from the Main Menu by pressing the OK button with Quick Install highlighted.
The following information will be presented.
The first 2 lines are read only and show the Unit Addresses for your receiver. Write down these
addresses for use in the next step: 6. Authorization.
Lines 3 and 4 are used to configure your receiver to acquire the appropriate satellite signal.
Set and verify the following fields, also shown in the picture above.
Input Port – RF Port 1 if you’re taking East Coast feeds or East and West Coast feeds. Port 2 should be
tuned if taking only West Coast feeds.
Transponder – 19 for Galaxy 15 (East Feeds) or Transponder – 8 or 16 for Galaxy 14 (West Feeds).
Frequency should automatically display: 1070.00 (Galaxy 15 T-19: East Feeds), 1130.00 (Galaxy 14 T-16:
West Feeds) or 1290.00 (Galaxy 14 T-8: West Feeds)
Input Port – RF Port 1
Modulation Mode – DVBS2 (default)
Symbol Rate – 30.00 (default)
Note: Even when using multiple RF ports, only the first port needs to be defined in this menu.
Signal Acquisition
In a moment the Signal light will turn green indicating that the satellite signal has been acquired. If you
are unable to acquire a signal call ARRIS Technical Support at 888.944.4357 for assistance.
