Arris CHP Max5000, Equipment Manual

Page: 167 / 267

Rev D System Management Module 2 (SMM-2) 7-1
C H A P T E R 7
SYSTEM MANAGEMENT MODULE 2 (SMM-2)
This chapter describes the CHP Max System Management Module 2 (SMM-2).
Overview —page 5-1
Auto Config —page 5-3
Equipment Description —page 5-8
Indicators and Connectors —page 5-9
Functional Description —page 5-11
Installation/Replacement of the SMM-2 —page 5-12
CLI Commands —page 5-34
MIBs —page 5-41
CHP SNMP Management —page 5-42
CHP Trap Information —page 5-44
SNMP Configuration and Operation —page 5-45
Upgrade Procedures —page 5-48
SMM-2 Specifications —page 5-49
Overview
The System Management Module 2 (SMM-2) is the next generation CHP Management Module
specifically designed to address the needs of all CHP modules. It manages CHP modules,
power supplies, and fans within a single rack and up to nine daisy-chained shelves. The
management Ethernet interface in the back of the chassis acts as a single entry point for
management of all CHP Max modules.
The SMM-2 provides following management interfaces:
■
SNMP (v1/v2c)
■
Ethernet Over USB
■
Serial Over USB
■
Command Line Interface (CLI) via Telnet
■
Remote Syslog