
Safety Information
8
General Precautions
Heavy weight! Risk of injury and damage.
The yoke must be mounted hanging or standing vertically. Lateral load can cause deformation or
breaking the spigot, its fixing screw, the yoke or the yoke brackets.
Wear suitable protective gloves to avoid injury from sharp edges (e.g. sheet metal, profile or other
cut edges).
The product must not be exposed to vibration. This could cause parts to come loose or other dam-
age.
The lamphead may slip out of the yoke brackets if it is suspended incorrectly.
Regularly check the tightness of the spigot fixing screw (recommended torque for all versions: 50
Nm / 37 ft-lb.).
Fixtures and accessories must be secured against fall when mounted above floor level. Always ob-
serve common and local safety regulations.
The fixture must only be secured against fall using the safety loop attachment provided for the safety
cable. Never use the carrying handle or the handle on the back as an anchor point for the safety
cable.
The top handle may be used as an anchor point for the safety cable of the accessories.
Secure the device against tipping when standing on the floor or when high wind load is present.
Always observe common and local safety regulations.
Disconnect all cables prior to transport.
Do not disassemble the yoke by unscrewing the tilt lock handles.
WARNING!
The ARRI Orbiter is intended for professional use and may only be operated by qualified persons.
It is not intended for household use.
Please follow the user manual of accessories and third party accessories such as battery packs and
battery chargers. They contain important safety and security information. Keep these safety and in-
stallation manual, the user manual and all operating and installation instructions belonging to the
system in a safe place for future reference and possible subsequent owners.
Never attempt to repair any part of the product on your own. Maintenance and repair work is only to
be carried out by an authorized ARRI service center.
In addition to regular visible checks ARRI recommends that all electric components are checked for
electrical safety by a professional every 12 month. Keep the protocol of the check.
Help protecting the environment by disposing the package material at your local recycling center.
All components comply to the guidelines listed below:
• Radio equipment directive 2014/53/EU
• Low voltage directive 2014/35/EU
• EMC directive 2014/30/EU
• RoHS directive 2011/65/EU
Please observe the information given in the „Safety leaflet ARRI lampheads“ (L5.40731.E). The
leaflet is available for download on our website www.arri.com.
NOTICE