background image

   

    

2

 

Imprint

 

 

Copyright © 2020 Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.  

All rights reserved.  
No parts of this document may be reproduced without prior written consent of Arnold & Richter Cine  
Technik GmbH & Co. Betriebs KG. Specifications are subject to change without NOTE. Errors, 
omissions, and modifications excepted.  
ARRI, ALEXA, AMIRA, LDS and LENS DATA SYSTEM are trademarks or registered trademarks of 
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All other brands or products are trademarks 
or registered trademarks of their respective holders and should be treated as such. Original version.  

For further assistance: 
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG 
Herbert-Bayer-Str. 10 

80807 München 
Germany  
www.arri.com 
 

Document revision history

 

 

Version 

 

 

Release 

 

 

Date   

1.0   

 

 

F07289 

 

 

20.02.2020 

 

 

Scope

 

This document describes the components and the setup of the SRH-3 and SRH-360 Stabilized 

Remote Head system and its components. 

 

 

Disclaimer

 

Before using the products described in this manual, be sure to read and understand all the 

respective instructions.  

Otherwise the customer must contact ARRI before using the product.  

While ARRI endeavors to enhance the quality, reliability and safety of their products, customers 

agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely.  

To minimize the risk of damage to property or injury (including death) to persons arising from defects 

in the products, customers must incorporate sufficient safety measures in their work with the system 

and heed the stated conditions of use.  

ARRI or its subsidiaries do not assume any responsibility for losses incurred due to improper 

handling or configuration of the TRINITY or other system components.  

ARRI assumes no responsibility for any errors that may appear in this document. The information is 

subject to change without NOTICE.  

For product specification changes after this manual was published, refer to the latest published ARRI 

data sheets or release notes, etc., for the most up-to-date specifications. 

Not all products and/or types are available in every country. Please check with an ARRI sales 

representative for availability and additional information.  

Neither ARRI nor its subsidiaries assume any liability for infringement of patents, copyrights or other 

intellectual property rights of third parties by or arising from the use of ARRI products or any other 

liability arising from the use of such products. No license, express, implied or otherwise, is granted 

under any patents, copyrights or other intellectual property right of ARRI or others.  

ARRI or its subsidiaries expressly exclude any liability, warranty, demand or other obligation for any 

claim, representation, cause, action, or whatsoever, express or implied, whether in contract or not, 

including negligence, or incorporated in terms and conditions, whether by statue, law or otherwise.  

In no event shall ARRI or its subsidiaries be liable for or have a remedy for recovery of any special, 

direct, indirect, incidental, or consequential damages, including, but not limited to lost profits, lost 

savings, lost revenues or economic loss of any kind or for any claim by a third party, downtime,  

good-will, damage to or replacement of equipment or property, any cost or recovery of any material 

or goods associated with the assembly or use of our products, or any other damages or injury of the 

persons and so on or under any other legal theory.  

In the event that one or all of the foregoing clauses are not allowed by applicable law, the fullest 

extent permissible clauses by applicable law are validated.  

Imprint

Summary of Contents for Microforce Joystick







Reviews: