!
18
!
17 Delay, Deadband, Ramp
17.1 Speed
Sets the acceleration and the deceleration of the pan and tilt axis.
Or how fast the pan and tilt axis will reach the adjusted speed when the
movements starts and how soft the movement will stop.
17.2 Deadband and Ramp
Deadband
sets the starting point of the Joystick.
This value controls when the Joystick will react after you touched it.
Ramp
sets how much ramp will be on the joystick movement.
NOTICE
All three parameters are related to each other.
If the speed is adjusted to a value below 50, keep the ramp value as low as possible.
If the value is to high, there will be more or less NO movement in the end.
Speed
Speed Value
Time
255
100
60
50
0
Delay
Delay
Joystick
value
max.
Joystick
range
Speed Value
100%
50%
0%
Start
50%
100%
Start
50%
100%
Deadband
Ramp
Delay, Deadband, Ramp
