ARRI MAXIMA QL, User Manual

Page: 16 / 21

! 16
!
9 MAXIMA Accessories
9.1 Mounting the Top Holder (K2.0010336)
NOTE
A 4mm 5/32” hex key is needed.
Open and remove the screw on the top of MAXIMA QL,
which secures the top handle.
Remove the Top Handle.
Engage both hooks of the Top Mount with the
rod at the back of the MAXIMA QL.
Bring back the screw and tighten it.
9.2 Mounting the Spider (K2.0010425)
NOTE
A 4mm 5/32” hex key is needed.
Open all eight M4 screws and remove
all four top covers of the Spider.
Place the bottom of the MAXIMA QL inside the Spider.
Place the four top covers of the Spider onto
the bottom rods of the MAXIMA QL and tighten
the eight screws.
NOTE
You can mount three different adapters at the bottom
of the Spider.
Accessories
Make sure that the screw is fully tightened.
! CAUTION
Do not over tighten the 8 screws.
! CAUTION