ARRIMAX
– Service Manual
Page 4 of 20
b) Safety Requirements Concerning Electrical Danger
» Please check the lamp head system and its electrical protection device before each use.
» The faultless function of the power supply and protection system must be ensured before connecting the
lamp head (e.g. grounding, circuit breaker).
It might be necessary to install additional protection measures; for example:
» the application of residual current operated protective devices (RCDs)
» the application of safety extra low voltage, protective separation or protective insulation
» equipotential bonding
Required Tools
1
Torx Screwdriver TX 20
2
Screwdriver Philips PH2
3
Ratchet: 13mm and 10mm
4
Allen Key size 1.5 mm
5
L4.85204.E Adjustment Pins G38 base (Set)
