ARRIMAX
– Service Manual
Page 16 of 20
Fan Cooling System & Maintenance
To access the cooling system for the
reflector/lampholder (2 front fans) remove the
lens door and reflector.
Place the lampead face down with the skid
facing you.
See the two service doors to access the fans.
Remove 4 screws (Phillips PH2) from the
doors. Carefully pull away.
Important: Maintain the fans by cleaning them
regularily. Keep the fans free of debree/bugs.
Failure can do so can cause damage to the
reflector.
Important: Watch that the flat cable connectors
are properly positioned and connected.
The fan must be installed in the right direction.
The air stream must move towards the inside of
the lamphead.