manualshive.com logo in svg

ARRI L Series, User Manual, Page: 33 / 52

Share
Download
ARRI L Series User Manual Download Page 33

Error messages

33

Error messages

From Firmware-version 1.0

Code

Error

Remedy

E.003

Controller over temperature.
STATUS lit up red.

Let the product cool down. The STATUS indicator changes to green when the product has 
cooled down. Turn the dimmer knob to „0“ or send an intensity value „0“ via DMX to acti-
vate the light engine again.

E.004

Light engine over temperature

See E.003

E.005

Power supply over temperature

See E.003

E.006

Calibration data of light engine 
faulty or EEPROM error.

WARNING: Loss of calibration data. This error can only be fixed by re-calibrating the light 
engine. Please contact the ARRI service.

E.007

Invalid PWM value calculation

Notice: The product can be used on. This message is more a notification than an error.

E.008

Invalid values during calculation

See E.007

E.009

Invalid values during calculation

See E.007

E.010

Fan error. The fan speed devi-
ates or the fan doesn’t run at all.

Set the fan to LOW or HI and see if it starts rotating, in order to determine if there is an 
electrical malfunction.
All mechanical tests or repairs may only be carried out by a trained service technician.

E.011

Fixture menu module not be 
detected.

If the fixture menu is working, error E.011 can be ignored. However, if the fixture menu 
remains dark (no LED lights up) we recommend to contact the ARRI service. They can 
then carry out detailed analyses.

E.012

Temperature sensor(s) are 
defective or deviation within 
NTC values too high.

One or more temperature sensors are defective or the deviation within the individual NTCs 
or BNTCs exceeds the variation tolerance of 12° C / 54° F. Check the error log (ALSM) to 
see which temperature sensors are affected. Contact the ARRI service.

E.013

Calibration data faulty.

WARNING: Loss of calibration data. Fixture needs to be re-calibrated.

E.014

Watchdog error

Notice: The product can be used on. This message is more a notification than an error.

E.015

LED channel faulty

Notice: The product can be used on. This message is more a notification than an error.

Summary of Contents for L Series





















































Reviews:

No comments