ARRI IVS, Instruction Manual

Page: 69 / 112

69
11:24:30/03
11:24:30:03
11:24:30/**
In case of FRAME COUNTER FILM there will be
a / before the frame count (the last two digits of the time
code display), in case of FRAME COUNTER VIDEO
there will be a : § .
The frame count is only active if time code is
actually recorded on film. In all other cases a
** § symbol will appear for the count.
Time code is only recorded on film at standard
speeds. These are 23.976 Fps, 24 Fps, 25 Fps,
29.97 Fps and 30 Fps. At all other speeds, time
code is displayed on the video assist without the
frame count and it is not recorded on film.
• Move the cursor > with the keys ß and ü to the line
FRAME . The keys ä and ö switch the frame
counter mode between FILM and VIDEO .
Inser
ter Facilities