ARRI ICS-1, Instruction Manual

Page: 16 / 66

16
hex screw
for
height adjustment
shutter plate control knob
ICS-guide
Installation
• Press the control knob
➪
photo on the Integrated
Capping Shutter and turn until the black plate reaches
the ICS-Guide.
Note: If the knob cannot be turned check if the door
lock is really in the shut position.
Do not use force to push the plate into the ICS-
Guide, as this could damage the plate or the guide.
• Check that the plate can be pushed into the ICS-Guide
easily and without catching. The height of the plate can
be set on the side of the ICS with the hex key
➪
photo .
Note: If the height of the plate is correctly set but it still
catches when being pushed in, the positioning
of the entire ICS door on the camera should be
re-checked.
• Check again that the plate slides into the ICS-Guide
easily and without catching.