En
Drill a hole in accordance with the table.
Clean the hole with a brush.
The V anchor (anchor bolt) is designed to install medium-to-heavy items
using a through hole. V anchors can be used with concrete, natural
stone and dense bricks (with no holes). When adjusting the V anchor
(anchor bolt), remember that the distance between the installation
points and the end of the base have a significant impact on the load. If
these distances are reduced, the load is also reduced.
Use a hammer to install the anchor.
Screw the anchor into the wall until it is steady.
Installation of the anchor
arameters for installing V anchors
D
– Diameter of the drill bit
L
– Thickness of the material installed
M
– Minimum depth of the perforation
H
– Minimum depth of the anchor installation
V ANCHOR (ANCHOR BOLT)
T
T
Dimensions
of the anchor
(in mm)
Length
of the
anchor
(L)
Diameter
of the
drill bit
(D)
Minimum
depth of the
perforation
(M)
Minimum
depth of the
installation
(M)
80/120
120
8
90
50
10/150
150
10
120
60
10/200
200
10
170
60
12/140
140
12
110
80
12/180
180
12
150
80
16/180
180
16
150
100
In the case of a safe with a key, if you lose the key you may
request a copy by indicating the serial number of your safe,
which is located on the bottom right of the door.
Periodically (every 6 months) check the condition of the battery
compartment to detect possible signs of rust, sulphation, etc.
Grease/oil any mechanical moving parts, such as locks and
bolts.
6. KEY COPY
5. MAINTENANCE
• Press “ON”.
• Press “ENTER”.
• Press “4”.
• Press “ENTER”.
• Enter the service code “160400” and press “ENTER”.
Once the lock has opened using the current master code, after
pressing “ENTER” it beeps 5 times and the green light flashes
5 times.
4. ERROR DIAGNOSIS WHEN CHANGING
THE MASTER CODE
