Array Solutions - SAL12/20/30 - Mark II Manual – Rev. 1.5.1 – September, 2018
20
The tensioner pictures below show how the triangular tensioners work by rotating it enough to make the
long branch of the rope straight (in this picture it would be counter clock wise) and then moving the
tensioner up or down the rope if more tension or less tension is needed correspondingly.
Outer corner of loop,
once you have the
horizontal dimension set, put tape tightly or use
tie-wraps to avoid the rope from slipping and
changing the dimension of the horizontal side of
each loop.
Triangle Tensioner:
The one shown in the
picture, when rotated counter clock wise will
straighten the long branch of rope allowing the
adjusting of the guy rope tension.
