Downloaded from
www.arqami.net
manuals search engine
2.3. Replace the Hard Disk
HDD Cover
a. Loosen the securing screw to remove
the HDD cover
Note:
To prevent injuries to the LCD Panel,
Carefully lay the front of the unit face down
on a flat, clean and stable surface with
additional cushioned material
(for example: blanket).
HDD Slot
With
HDD Module
b. Pull the HDD Module to the left to
detach it from the POS unit.
Disconnect the HDD Cable to remove
the HDD Module.
Remove the HDD Module
HDD Bracket
Protective Film
c. Loosen the securing screws to
remove the hard disk from the
bracket.
Then replace a new hard disk (with
protective film attached to the HDD)
d. Re-install the HDD module and
replace the HDD cover to the POS.
12
