6110 Lamb Road • Wyoming, NY 14591
www.arp-hivoltageinsulators.com
Phone: 585.495.6231 • Fax: 585.495.6526
email: [email protected]
Camden Printing Form 25169 - Rev. 8-15
Installation Guide
The Assembled Coupling Insulator
& Fuse Cutout Switch
☞
INTRODUTION
Thank you for your cooperation to use our products.
This construction guide is for safety assembled coupling insulator and fuse cutout
switch. Whenever using the items, you must remember contents of construction
guide and use properly.
☞
CONFIGURATION
Part A
Part B
☞
CAUTION
1. To installed the products safety, you must read the construction guide.
2. Don fix and disassemble intentionally, when maintaining and repairing.
3. To be safe, please the specialists having electronic wiring.
☞
NOTICE
Following safety instruction…
If you do not understand any portion of this construction guide and need
assistance, contact manufacturer.
Thoroughly and carefully read this guide before installation.
▶
Additional copies
If you need additional copies of this instruction guide, contact your nearest sales
Office, Authorized Distributor, or Headquarters.
▶
Coupling insulator for fuse cutout switch.
INTRODUCTION and CAUTION
• Thank you for purchasing our Cutout Switch &
Coupling Insulator
• Please read and use the Step by Step instructions
on the following page to assemble & install the
components
• These installation instructions are important to safely
and properly install the Cutout Switch &
Coupling Insulator to a Nema Type mounting bracket
• If you do not understand any portion of this
installation guide and need assistance please
contact “ARP” customer service at the address &
contact information below.
CONFIGURATION
Installed on Mounting Bracket
Div. of TMP Technologies Inc.
Advanced Rubber Products
Installation Instructions for Attaching Cutout
& Coupling Insulator to Mounting Bracket
™
