Aros 12k55enua, Manual

Page: 20 / 36

18
Going back to user settings, using the button, you can configure the four analogue probes
(optional - e.g. radiation, temperature, anemometer etc, with electrical output 0-10 V):
By pressing one of four buttons, you configure the individual probe:
The single measurement, as seen, can be configured in detail:

Description

Unit of measurement

Minimum value (corresponding to 0 VDC input)

Maximum value (corresponding to 10 VDC input)
The probe can be enabled or disabled as desired.
Press the button with the symbol to save the probe configuration. Consult the technical
documentation for the 0-10 V probes to enter the correct configuration data.