ARO PD01X Operator'S Manual Download Page 1

OPERATOR’S MANUAL

PX01X-XXX-XXX-AXXX

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

RELEASED:

3-7-13

REVISED:

4

-25-14

(REV. F)

1/4" DIAPHRAGM PUMP

1:1 RATIO (NON-METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING, 

 OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET – BRYAN, OHIO 43506

 (800) 495-0276 

y

 FAX (800) 892-6276

© 2014

CCN 80448053

www.ingersollrandproducts.com

Model PD01X 

Model PE01X 

Figure 1

PUMP DATA

Models

. . . . . . see Model Description Chart on page 2 for

                              “-XXX” options

Pump Type

. . Non-Metallic Air Operated Double Diaphragm

Material

. . . . . see Model Description Chart

Weight

. . . . . . Polypropylene. . . . . . . . 2.86 lbs (1.30 kgs)

                          PVDF . . . . . . . . . . . . . . . . . 3.88 lbs (1.76 kgs)
                          Acetal . . . . . . . . . . . . . . . . 3.52 lbs (1.60 kgs)

Maximum Air Inlet Pressure

. . . . . . . . 125 psig (8.6 bar)

Minimum Air Inlet Pressure

. . . . . . . . . 10 psig (0.69 bar)

Maximum Outlet Pressure

. . . . . . . . . . 125 psig (8.6 bar)

Maximum Flow Rate

. . . . . . . . . . . . . . . . 5.3 gpm (20 lpm)

Maximum Material Inlet Pressure

. . . . 10 psig (0.69 bar)

Displacement / Cycle @ 125 p.s.i.g

. . 0.019 gal / 0.072 ltrs

Maximum Particle Size

. . . . . . . . . . . . . 1/16” dia.(1.6 mm)

Maximum Temperature Limits (diaphragm / ball / seat 

material)

Acetal . . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)
E.P.R. / EPDM. . . . . . . . . . . . . . -60° to 280° F (-51° to 138° C)
Kynar® PVDF . . . . . . . . . . . . . . 10° to 200° F (-12° to 93° C)
Hytrel®  . . . . . . . . . . . . . . . . . . . -20° to 150° F (-29° to 66° C)
Neoprene . . . . . . . . . . . . . . . . 0° to 200° F (-18° to 93° C)
Nitrile® . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)
Polypropylene . . . . . . . . . . . . 35° to 175° F (2° to 79° C)
Viton® . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)
Santoprene®. . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)
PTFE. . . . . . . . . . . . . . . . . . . . . . 40° to 225° F (4° to 107° C)

Dimensional Data

. . . . . . . . . . . . . . . . . . . see page 10

Noise Level

 @ 70 p.s.i., 60 c.p.m.. . . . . . 62.3 db(A)

c

c

The pump sound pressure levels published here have been updated to 
an Equivalent Continuous Sound Level (L

Aeq

) to meet the intent of ANSI 

S1.13-2005, CAGI-PNEUROP S5.1.

    Mounting Adapter Plate Optional Accessory Kit (24123879) available.
    Please contact your nearest 

ARO / Ingersoll Rand

 customer service or 

    distributor for details.

RELEASED 28/Apr/2014 16:33:18 GMT

MARTELI BOMBAS Y 

EQUIPOS S.A. DE C.V.

www.marteli.com.mx 

Tel.(81)800-804-11 y 12 

[email protected]

Summary of Contents for PD01X











Reviews: