21
4. OPERATION PREPARATION
Please charge your appliance fully for at least 4 hours before use. All
lights on the appliance will be on when fully charged.
Charging
Make sure to place the charging unit on a solid, flat
surface if you are going to use it on the table.
Plug in the charger. The light on the charger will turn red
during charging and green when charging is complete. Place
the handle of the appliance in the slot on the charging
unit.
The lights on the appliance will begin
to flash when it starts to charge.
All lights on the appliance will be on
when charged.
If you want to secure the charging unit to the wall, first lean the body of
the charging unit against the wall and mark the holes. Drill holes in the marked
points and place the fixing plugs.
Tighten and secure the screws through the front hole by leaning the charging unit
against the wall.
If you want to remove the charging unit from the wall, simply loosen the screws
for a few turns and move the charging unit upwards.
