Arnica MILA, Instruction Manual

Page: 15 / 20

Sofa cleaning nozzle (С4) is used to clean sofas, pillows, mattresses, seating surfaces.
Turbo Brush (CS) is especially used for effective cleaning of carpets and rugs.
Pull the power cord to the desired length Ьу holding it from the plug and plug it
to the outlet.
Turn оп the appliance Ьу pressing the on/off button(AЗ)
You may set the suction power as you desire Ьу using (А4) suction power control knob
When you complete your work with the appliance;
Press the on/off button to turn off the appliance and unplug it from the outlet.
Hold and pull the cord slightly to rewind .
WARNINGI 50МЕ FEATURE5 МАУ VARY А5 PER MODEL.
МАКЕ 5URE ТНАТ ТНЕ CORD OF ТНЕ APPLIANCE 15 DRY АТ ALL
TIME5. DO NOT REWIND ТНЕ CORD IF IT 15 WET OR HUMID
When you do not use the appliance, place brush into the parking socket (А 11)
as horizontal or vertical park position , cradle together with the tubes and the hose.
Do not store your appliance outdoors or at the temperatures lower than the
freezing temperature.
V.CLEANING AND MAINTENANCE
Always unplug the appliance before starting апу cleaning or maintenance operations.
Always clean the hose, tubes, filters and accessories after use to ensure the perfect
hygiene and to extend your vacuum cleaners life, never leave the appliance dirty.
Clean the appliances's surface , tubes and accessories with а moist towel.
Always check the dirt level in the dust container and never let the dust level to exceed
max sign оп the side of the dust container.
То empty the dirt in the dust container;
Push the dust container eject button(A8) and lift the container upwards.Take the dust
container cover(Aб) out and empty the dirt in the dust container(AS).
You сап wash the dust container(AS) and the dust container cover (Аб) with warm
water but make sure to dry completely before reuse.
Check the motor protection filter(A 16), clean if needed. То ensure the continuous
suction performance , clean filters periodically after each use.
Ореп the filter cover (А 14) using the filter cover lock clip(A 15), take the air outlet
filter (А 12) and sponge filter (А 13) and clean if needed.
You сап wash motor protection filter ,sponge filter and air outlet filter with warm
water. Never use chemicals or detergent. Make sure to dry completely before reuse.
Do not use апу damaged or teared filters and change them with new ones. You сап
purchase new filters from After Sales Points or authorized services.
МАКЕ 5URE ТНАТ ТНЕ DU5T CONTAINER, DU5T CONTAINER COVER
AND ALL FILТERS ARE DRY АТ ALL TIME5. DO NOT REIN5TALL WHEN
WET OR HUMID. DO NOT OPERATE ТНЕ APPLIANCE WITHOUT FILTER5
15