7
• Put the foodstuffs into the bowl .never fill the bowl above the
maximum limit indicated.
• Place the blade on the center pin of the chopper bowl. Press down
the blade and lock bowl. Always place the chopper bowl on the
anti-slip base ( Operation of the direction, please see the figure
as show) .
• Place the food in the chopper bowl.
• Place the chopping bowl lid on the chopper bowl.
• Turn the motor unit on the chopping bowl lid until it locks.
• Choose switch to operate the chopper. During processing, hold the
motor unit with on hand and the chopper bowl the other.
• After use, turn the motor unit off the chopping bowl lid.
CLEANING
Cleaning the motor unit and chopping bowl lid only with a damp cloth
only. Do not immerse the motor unit in water!
• All other parts can be cleaned in the dish washer. However, after
processing very salty food, you should rinse the blades right away.
• Also, be careful not to use an overdose of cleaner or decalcified in
your dishwasher.
• When processing food with color, the plastic parts of the appliance
may become discolored wipe these parts with vegetable oil before
placing them in the dishwasher.
• The blades are very sharp, please attention.
• Unplug the appliance before cleaning.
TIPS FOR S BLADE
Processor bowl (for “S” blade)
Ingredients
Maximum
Operation times
Preparation Speed
meat
500g
20-30 sec
1~2cm
II
nuts, almonds
300g
10-15 sec
/
II
cheese
200g
10 sec
1~2cm
II
bread
160g
10sec
1~2cm
II
onions
300g
10 sec
1~2cm
II
Whisk
Egg white
2 eggs
2 minutes
/
II
Cream(37% fat)
250ml
2 minutes
/
II
Hand Blender
Vegetables soup potatoes
100g
1 minute
2cm
II
onion
100g
2cm
II
carrots
100g
2cm
II
Water
450g
/
II
Mayonnaise
Vegetable oil 150g
30 sec
/
II
egg
1
/
II
vinegar
14g
/
II
Carrot juice
Carrot
300g
1 minute
2cm
II
sugar
20g
/
II
water
480g
/
II
How to use the slicing/Grating
For preparing a maximum of 500g food stuffs at once.
Blade
Slicing:
potatoes for gratins dauphinois, carrots, cucumbers,
etc
Blade Grating:
grated carrots, celery
.
•
Put the blade into the Knife Bracket –holder disc. place the
spindle drive onto the spindle in the middle of the bowl, then the
blade –holder disc onto the spindle drive , and then put the
blender lid adaptor on the lid .
•
Position and lock the lid.
•
Put the motor unit in place on the adaptor then start the
appliance.
•
Put the foodstuffs into the feeder tube and guide them using the
pusher, never your fingers, or a utensil.
