11
on the Tank.
• Replace the Motor Protector S filter to its place on
the base. Please do not forget to place S filter on the
base unit. Otherwise you vacuum cleaner does not
work properly.
• Drop 2 or 3 drops of perfume supplied with your
vacuum cleaner into the water for providing your
room’s air smells good.
• Replace the Motor Protective S filter to its place on
the base. Please do not forget to place S filter on the
base unit. Otherwise you vacuum cleaner does not
work properly.
• Replace the Water Filter Body and water filter tube to
their places in the Transparent water tank. Replace
the water tank Cover.
• Replace the Transparent Reservoir Group on the main
Body tightly.
• In order to connect the Hose Group to the Main Body
Group, press the locking buttons on the Vacuum Head
of the Hose and place it on to the Vacuum Head on the
tank.
•
WARNING: Do not ever vacuum wet floors or water
from sink. Only perform dry vacuuming with your
vacuum cleaner.
V. OPERATING THE APPLIANCE
•Perform the Assembly and Preparation for Use
processes.
•Choose the most appropriate accessories for your
purpose and affix these accessories directly on the
gun section or affix the Extension tubes first and then
accessories on their ends.
•For an effective cleaning, use the accessories as
mentioned in the following.
» Main brush for vacuuming carpets, rugs and hard
grounds.
»Crevice nozzle for cleaning the dusts, chips and etc.
at radiators, drawers and etc. narrow sections.
» Directly the Extension Tube for cleaning soil, debris, chips,
feathers and etc.
»The Small brush Accessories for cleaning racks,
clothes, electronic devices, lampshades, furniture,
curtains and etc.
» Round brush for cleaning curtains or dusting.
» The hard ground brush for cleaning dust and etc.
on the hard grounds such as parquet.
•Plug in your vacuum cleaner and start it by pressing
the On-Off Button. You can adjust your vacuum
cleaner’s suction power turning the On-Off Switch to
right or left.
• After completing the vacuuming process, turn off
your vacuum cleaner by pressing the On-Off Button.
Unplug your vacuum cleaner and furl the cord by
pressing Cord Spinning button. For some models,
for furling the cable, it will be sufficient to hold and
pull the cord lightly. This specification can vary in
accordance with the model.
VI. CLEANING AND MAINTENANCE
• You have to unplug your device, before beginning any
Cleaning or Maintenance processes.
• After every use, empty the water in the Transparent
Water Tank and clean and dry the tank.
• Do not ever leave your vacuum cleaner with liquid
and dirt in it for hygienic purposes and extending the
life of your vacuum cleaner.
• Pull and remove the Water Filter Body. The Water
Filter Body can be washed with warm and soapy
water or under tap water. Dry after you wash these
parts before replacing them.
• The cleanness of hepa filter should be checked
periodically. Clean the filter if it is not clean. This
filter loses its characteristics after a certain usage
period and requires replacing.
• Cleaning of motor protective S filter which is placed
under the transparent water tank on the main body
must be checked periodically and must be cleaned
with warm water, if necessary. Before using it again,
make sure the filter is dry. It must be changed every
6 months at least depending on the frequency of
usage.
• Carry your vacuum cleaner by holding from its Body
Handle.
• Just use original parts and accessories for efficient
cleaning and lifecycle and warranty of your device.
Provide the accessories and parts from the closest
Authorized Service when it is required.
•
WARNING: Only perform dry vacuuming with your
vacuum cleaner.
