TDA-500 DIGITAL POWER AMPLIFIER
User Manual
page 24/28
armtel.com
© Armtel
ENG
6 TRANSPORTATION
6.1 TDA-500, packed in a shipping container, may be transported by the following
modes of transport:
−
by rail in closed wagons for any distance at speeds acceptable for rail transport;
−
air and water in closed sealed compartments at any distance at speeds
permissible for the respective mode of transport;
−
by car in closed vans.
6.2 During transportation of TDA-500 there should be no direct impact of atmospheric
precipitation, splashing water, solar ultraviolet radiation, dust, sand, aerosols.
6.3 During transportation, the shipping container with TDA-500 must be securely
fastened with fasteners, preventing its movement relative to the vehicle when exposed to
mechanical loads.
Note -
The shipping container is not included in the TDA-500 delivery set and is
available on a separate order. Shipping containers must comply GOST 23088-80.
6.4 When transporting TDA-500, the requirements of handling signs must be observed.
6.5 When loading and unloading the TDA-500 must be protected against impacts.
6.6 Stacking during transportation no more than 6 tiers.
6.7 Transportation conditions in terms of the impact of mechanical factors - Zh
according to GOST 23216-78.
7 DISPOSAL
The product is not to be disposed together with household waste and should be
delivered to a specialized center for the disposal of electronic products. The operating
organization must take full responsibility for the product disposal.
