manualshive.com logo in svg

Armitage Shanks Sensorflow A4126AA, Installation Instructions Manual

Share
Download
Armitage Shanks Sensorflow A4126AA Installation Instructions Manual Download Page 2

2

TABLE OF CONTENT

1  IMPORTANT PRE-INSTALLATION NOTES ................................... 3
2  PRODUCT BOX CONTENTS  ......................................................... 4
3  SUPPLY CONDITIONS .................................................................... 5
4  WATER REGULATIONS .................................................................. 5
5  INSTALLATION GUIDE .................................................................... 6

5.1 MOUNTING .........................................................................................................6
5.2  PLUMBING OVERVIEW .....................................................................................7
5.3  ELECTRICAL CONNECTION ............................................................................9

6  TAP OPERATION ........................................................................... 14
7  SENSOR RANGING ....................................................................... 15
8  OUTLET OPTIONS ........................................................................ 16
9 MAINTENANCE ..............................................................................16

9.1  SOLENOID VALVE ............................................................................................16
9.2  HYGIENE FLUSH (AUTOMATIC) ....................................................................17
9.3  ISOLATING VALVE ...........................................................................................18

10  SPARE PARTS ...............................................................................19
11  CLEANING CHROME SURFACES ............................................... 20

Sensorflow 21 panel mount spout 

with remote sensor

These panel mount Sensorflow 21 electronic products are designed for water economy & hygienic “no-

touch” operation.

The spout is operated by the remote infrared sensor which is triggered by hand movement in the sensing 

region. When the hands are moved away, the water will stop automatically within a couple of seconds.

These products are designed to be supplied with pre-mixed or cold water.

The two designs 150 & 230mm reach are each available in 3 versions: Mains powered (transformed) 

with option to link up to 5 link units & independent battery powered units:

A4126AA 

(150) &

 A4182AA 

(230) are supplied with

 battery unit

A4180AA 

(150) &

 A4183AA 

(230) are supplied with

 mains power unit

A4181AA 

(150) &

 A4184AA 

(230) are supplied with

 link unit 

 

 

 

       

(Link up to 5 per A4180AA or A4183AA)

Summary of Contents for Sensorflow A4126AA





















Reviews:

No comments

Brands by name

Popular brands

Load more brands