manualshive.com logo in svg

Armitage Shanks Sensorflow 21 A4851AA, Installation Instructions Manual

Share
Download
Armitage Shanks Sensorflow 21 A4851AA Installation Instructions Manual Download Page 2

2

TABLE OF CONTENT

1  IMPORTANT PRE-INSTALLATION NOTES ................................... 3
2  PRODUCT BOX CONTENTS  ......................................................... 4
3  SUPPLY CONDITIONS .................................................................... 5
4  WATER REGULATIONS .................................................................. 5
5  INSTALLATION GUIDE .................................................................... 6

5.1 MOUNTING .........................................................................................................6
5.2  PLUMBING OVERVIEW .....................................................................................7
5.3  ELECTRICAL CONNECTION ............................................................................9

6  TAP OPERATION ........................................................................... 14
7  SENSOR RANGING ....................................................................... 15
8  OUTLET OPTIONS ........................................................................ 16
9 MAINTENANCE ..............................................................................16

9.1  SOLENOID VALVE ............................................................................................16
9.2  HYGIENE FLUSH (AUTOMATIC) ....................................................................17
9.3  ISOLATING VALVE ...........................................................................................18

10  SPARE PARTS ...............................................................................19
11  CLEANING CHROME SURFACES ............................................... 20

Sensorflow 21 compact basin spout 

with integral sensor

This compact angled basin mount Sensorflow 21 electronic product is designed for water economy & 

hygienic “no-touch” operation.

The spout is operated by the integral infrared sensor which is triggered by hand movement in the 

sensing region. When the hands are moved away, the water will stop automatically within a couple of 

seconds. 

This product is designed to be supplied with pre-mixed or cold water.

This product is available in 3 versions: Mains powered (transformed) with option to link up to 5 link units 

& independent battery powered units:

A4852AA

 supplied with 

mains power unit

A4853AA

 supplied with 

link unit

 (up to 5 per A4852AA)

A4851AA

 supplied with 

battery unit

Summary of Contents for Sensorflow 21 A4851AA





















Reviews:

No comments

Brands by name

Popular brands

Load more brands