7
3
Going underneath Trough,mark positions on wall of holes in L brackets.
8
Remove Trough.
9
Drill and plug L bracket holes in wall.
10
Mount Trough and screw to wall.
a
b
Page 1: ...eck measure top of key hole positions in back of Trough Carefully drill wall Insert and tighten fixations to ensure expansion sleeves are locked in Transfer those positions to wall to give required front rim height Mark positions on wall ...
Page 2: ...d in the keyholes can be adjusted after the trough has been hung this can help reduce the gap to wall This can be done via cut outs in the plywood sub frame Bolt under head distance to wall needs to be sufficient to accommodate thickness of trough material Ensure fixing points are level and bolts are fully anchored into wall Z Z 5 Remove front access panel 6 Mount Trough ensuing fixations are full...
Page 3: ...7 3 Going underneath Trough mark positions on wall of holes in L brackets 8 Remove Trough 9 Drill and plug L bracket holes in wall 10 Mount Trough and screw to wall a b a b ...
Page 4: ...ur products The right is therefore reserved to vary specifications without notice CUSTOMER CARE HELPLINE 44 0 844 543 6170 FAX LINE 44 0 844 543 6171 email aftersalesnonresidential armitageshanks co uk If required tighten key hole fixing points through gap in back underneath Trough 12 Replace front panel ...
